However none of them can be viewed under Live View either within the web app or the SS client (each camera shows a grey screen). Under Live View I see that the stream is controlled by the camera and this is greyed out so I cannot change it. I haven't changed anything within the camera settings so all look like normal default settings (i.e .264 Answer. To move the date and time or name of the IP camera you will need to access the camera using a web browser. After accessing the camera go to Configuration > Image > OSD Settings. The information you want to move will be in a different color typically red residing inside of a box. Use the mouse and click on the information within the box Title: How to Solve Hik-Connect Offline Issue Version: V2.0 Date: 7/12/2019 Product: Cameras, NVR, DVR Page: 4 of 6 iii. Input command ping dev.hik-connect.com and click Enter. Enter the Live View page. Note: For details about entering the live view page, see Live View. Select a live view window and tap . Tap Share. Option 3 : For security control panel, tap the device on Hik-Connect page to enter the device details page and then tap . Set the account that you want to share with. Option 1: In reply to Undisclosed Integrator #2. Yes, usually NVR's own audio in and out are just used for Two-way Talk (live only). If you want to hear the audio in the recorded video. Normally you need to make sure the IP camera that you connected support audio input and you connect a mic to it. Then make sure on the NVR's encode setting you enable the mSNb.

can t access hikvision live view